A decent bracket that takes the weight of an older 42 inch TV, allowing the three position I needed, slightly angled for viewing, flat for allowing a projector screen to pass it and the opposing 90 degrees to allow access to cables and the items below. However the length of the arm is shorter than half the width of this TV which has a thin bezel. This meant I had to mount it on an additional sheet of 25mm thick ply to get the extra two centimetres required to swing between the two furthest positions 90 degrees apart. Nearly returned it for the next size up, but noticed that model is a flat scissor action bracket, which would not do the job.So very good on weight and sturdiness, but losses a point on reach, which cannot fully function for the upper end of the TV sizes stated without additional cost and DIY. Also the cable brackets whilst interesting, require the cables to be very long to have the slack required to allow the swing across the range, without them snapping open.